Bill of Materials

All Items are Included in the 14" Wright Skiff Boat Kit

Monday

Inner Stem - 3 1/2” x 3 1/2” x 20” Quantity - 1 Reference Number 2

Spreader - 1 1/2” x 5 1/2” x 46” with 1" x 2" Stop (Return) Quantity - 1 Reference Number 3

Side Boards with Bevel Cut - 3/4” x 5 1/2” x 14’ Quantity - 2 Reference Number 4

Transom - 1 1/2” x 18” x 38” Quantity - 1 Reference Number 6

Chines - 3/4” x 2 1/4” x 14’ Quantity - 2 Reference Number 7

Straight Sideboard Without Bevel Cut (Return) Quantity - 1

Winding Stick (Return) Quantity - 1

Stainless Steel Screws - Star Drive - 1 1/4"” (Jug) Quantity - As per plans

Stainless Steel Screws - Star Drive - 2” (Jug) Quantity - As per plans

Fender Washers (Return) Quantity - As per plans

4200 Fast Cure Marine Adhesive Sealant (Tube) Quantity - As per plans

Tuesday

Inner Keel or Keelson - 3/4” x 3 1/2” x 14’ Quantity - 1 Reference Number 11

Bottom Boards (3 Packs) - 3/4” x 5 1/2” x 8” - 50” Quantity - 29 Reference Number 8

     Exhibit 1 - Bottom Board Layout Sheet (PDF)

Outer Keel - 3/4” x 3 1/2” x 14’ Quantity - 1 Reference Number 11

Skeg 3/4” x 3 1/2” x 36” Quantity - 1 Reference Number 12

Winding Stick (Return) Quantity - 1

Stainless Steel Screws - Star Drive - 1 1/4" (Jug) Quantity - As per plans

Stainless Steel Screws - Star Drive - 1 5/8” (Jug) Quantity - As per plans

Stainless Steel Screws - Star Drive - 2” Quantity - As per plans

4200 Fast Cure Marine Adhesive Sealant (Tube) Quantity - As per plans

Paint Quantity - As per plans

Wednesday

Stern Ribs - Port & Starboard - 1 1/4” x 2 1/8” x 18” Quantity - 2 Reference Number 10

Ribs - 1” x 2 1/8” x 18” Quantity - 18 Reference Number 9

Side Boards - 3/4” x 5 1/2” x 14’ Quantity - 2 Reference Number 4

Side Boards with Sheer Cut ¾” x 7 ¼” x 14’ Quantity - 2 Reference Number 5

Outer Stem 2 ¼” x 3 ½” x 24” Quantity - 1 Reference Number 1

Carriage Bolts with Nuts and Washers 5/16” x 8” Quantity - 2

Stainless Steel Screws - Star Drive 1 1/4" (Jug) Quantity - As per plans

Stainless Steel Screws - Star Drive - 1 5/8” (Jug) Quantity - As per plans

Stainless Steel Screws - Star Drive - 2” (Jug) Quantity - As per plans

Paint or Stain Quantity - As per plans

Items to be painted or stained for installation on Thursday are as follows:

Oarlock Blocks - 3/4” x 2 5/8” x 5” Quantity - 2

Front Seat - 1” x 9 1/4” x 33” Quantity - 1 Reference Number 16

Middle Seat - 1” x 9 1/4” x 46” Quantity - 1 Reference Number 17

Rear Seat 1” x 9 1/4” x 42” Quantity - 1 Reference Number 18

Seat Rails, Rub Rails, and Clamps - 3/4” x 1 3/8” x 14’ Quantity - 6 Reference Number 13, 14 & 15

Thursday

Breast Hook - 1” x 9 1/4"” x 10” Quantity - 1 Reference Number 19

Seat Rails - 3/4" x 1 3/8” x 14’ Quantity - 2 Reference Number 13

Rub Rails - 3/4" x 1 3/8" x 14 Quantity - 2 Reference Number 14

Sheer Clamps - 3/4"” x 1 3/8” x 14’ Quantity - 2 Reference Number 15

Stainless Steel Screws - Star Drive - 1 5/8” (Jug) Quantity - As per plans

Paint or Stain Quantity - As per plans

Filler Quantity - As per plans

Friday

Oarlock Blocks - 3/4” x 2 5/8” x 5” Quantity - 2

Rub Rails - 3/4” x 1 3/8” x 14’ Quantity - 2 Reference Number 14

Oarlock Sockets Quantity - 2 Reference Number 21

Oarlocks Quantity - 2 Reference Number 20

Stainless Steel Screws - Star Drive - 1 1/4” (Jug) Quantity - As per plans

Stainless Steel Screws - Star Drive - 1 5/8” (Jug) Quantity - As per plans

Paint or Stain Quantity - As per plans

A special thanks to the fine folks who meticulously cut and assemble our kits!

Gary Moore, Seth Penney, and Jim Robusto

The dry kit weight is approximately 265-300 lbs.